Filter
Top Products
29 (GB)
COLOR SYS (System)
Selects the color system of the input signal.
AUTO: Automatically selects one of the following
signals: NTSC
3.58, PAL, SECAM, NTSC4.43.
PAL-M/N: Automatically selects one of the
following signals: PAL-M/PAL-N, NTSC
3.58.
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system appropriate to the input signal.
VOLUME
Adjusts the volume. The volume can be adjusted for
each of INPUT A, INPUT B (VPL-PX15 only),
VIDEO and S VIDEO input.
Input signals and adjustable/setting items
Item Input signal
Video or
Component
RGB
1)
S video (Y/C)
Video GBR
CONTRAST
BRIGHT
COLOR –
HUE –
SHARP –
RGB
–––
ENHANCER
D. PICTURE
––
GAMMA –––
MODE
COLOR
TEMP
COLOR
–––
SYS
VOLUME
: Adjustable/can be set
– : Not adjustable/can not be set
1) The RGB signals of a computer
(
except for B & W
)
(NTSC3.58/
4.43 only)
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items for a particular input signal are not
displayed in the menu.
Operation
1. Select an item
Use the M or m key to select the item, then press the
, or ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the value, press the M or , key.
To decrease the value, press the m or < key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the M or m key to change the setting.
Press the ENTER or < key to restore the original
screen.
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A/B connector. Adjust the
picture further for a finer picture after the picture is
adjusted by pressing the APA key. Adjust the picture
to the point where it looks clearest.
When the video signal is input
When the RGB signal is input
Memory No.
Signal type
Memory No.
Signal type
The PICTURE CTRL Menu / The INPUT SETTING Menu
INPUT SETTING
SHIFT H: 200 V: 30
ASPECT: 16:9
NO.01
VIDEO/60
VIDEO
INPUT SETTING
DOT PHASE: 0
SIZE H: 1056
SHIFT H: 200 V: 30
SCAN CONV: ON
NO.17
800x600
INPUT-A