Filter
Top Products
DSL/Cable Router User Guide
42
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the DSL/Cable Router's Access
Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the DSL/Cable Router, each Wireless Station must have
compatible settings, as follows:
Mode
The mode must be set to
Infrastructure
.
SSID (ESSID)
This must match the value used on the DSL/Cable Router. The default
value is SpeedStream
Note! The SSID is case sensitive.
WEP
By default, WEP on the DSL/Cable Router is
disabled
.
• If WEP remains disabled on the DSL/Cable Router, all stations must
have WEP disabled.
• If WEP is enabled on the DSL/Cable Router, each station must use
the same settings as the DSL/Cable Router.