Filter
Top Products
DSL/Cable Router User Guide
78
Figure 45: Routing Screen
Data - Routing Screen
RIP
Enable RIP
Check this to enable the RIP (Routing Information Protocol) feature
of the DSL/Cable Router.
The DSL/Cable Router supports RIP 1 only.
Static Routing
Static Routing
Table Entries
This list shows all entries in the Routing Table.
• The "Properties" area shows details of the selected item in the
list.
• Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
Properties
•
Destination Network
- The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
•
Network Mask
- The Network Mask for the remote LAN seg-
ment. For class "C" networks, the default mask is 255.255.255.0
•
Gateway IP Address
- The IP Address of the Gateway or Router
which the DSL/Cable Router must use to communicate with the
destination above. (NOT the router attached to the remote seg-
ment.)
•
Metric
- The number of "hops" (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The de-
fault value is 1.