Filter
Top Products
VAIO User Guide Back | Back to Top
Troubleshooting
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
View
Playback
MONITOR Function
Backup / Recovery
Security
Other Operations
Notifications
Preparing for Wall Mounting
Your VAIO computer can be mounted on a wall using a wall mounting bracket (not supplied).
It is recommended that you use the Sony SU-WL100 wall mounting bracket.
Please use four M4 screws (not supplied) which are compliant with the Video Electronics
Standards Association (VESA) standard mounting hole pattern 100mm × 100mm for
installing the computer to your mounting bracket.
Note
The weight of your VAIO computer is within the range of supported weight of your
mounting bracket. See the manual that came with your mounting system for the weight
information.
While your VAIO computer is wall mounted, do not place any objects on top of the
computer so as not to break the frame and cause the main unit to fall from the wall,
resulting in damage to the computer or personal injuries.
1. Turn off your VAIO computer and peripheral devices, and disconnect the power cord
and all connection cables.
2. Wait for a while until the computer cools down.
The inner parts of the computer may be hot just after turning off. Be careful to avoid
burns while handling the computer in this state.
3. Remove the back panel of the computer.
4. Lay a clean cloth on a level, flat surface, place the computer on it.
5. Remove the seven screws (1) with a cross slot screwdriver and take the foot stand (2)
off the computer.
320
Search