Filter
Top Products
VAIO User Guide Back | Back to Top
Troubleshooting
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
View
Playback
MONITOR Function
Backup / Recovery
Security
Other Operations
Notifications
Connecting to a Standard Antenna
<TV tuner board installed models>
Depending on the type of antenna system in your home, your connection may require a
VHF/UHF RF combiner/transformer to connect the computer and the indoor/outdoor antenna
system.
Hint
If you are connecting to an indoor/outdoor antenna, you may need to reorient the
antenna for best reception. Move the antenna cable away from other power sources or
connectors to reduce signal interference.
To connect in land-based (terrestrial) broadcasting mode
(Option 1)
1. Connect one end of a TV coaxial cable (1) to your antenna outlet (2). Connect the
other end to a VHF/UHF RF combiner/transformer (3).
2. Connect a coaxial cable feed connector (4) to the VHF/UHF RF combiner/transformer
(3).
3. Connect one end of another TV coaxial cable (5) to the feed connector (4). Connect
the other end to the
CABLE/ANT (DIGITAL/ANALOG) port (6) on the computer.
To connect in land-based (terrestrial) broadcasting mode
(Option 2)
1. Connect one end of a 300-ohm twin lead cable (1) to the screw-type grips at your
antenna outlet (2). Connect the other end to the grips on a VHF/UHF RF
combiner/transformer (3).
2. Connect a coaxial cable feed connector (4) to the VHF/UHF RF combiner/transformer
(3).
3. Connect one end of the TV coaxial cable (5) to the feed connector (4). Connect the
other end to the
CABLE/ANT (DIGITAL/ANALOG) port (6) on the computer.
348
Search