Filter
Top Products
User’s Guide
Declaration of Conformity (FCC): SX-215
Silex Technology America, Inc, located at 157 West 7065 South, Salt Lake City, Utah 84047, USA, (801)
748-1199 declares this equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Trade Name: Silex Technology America, Inc
Product: Ethernet and Wireless 802.11b and 802.11g enabled print server
Model: SX-215
FCC ID: N6C-SX10WG
Standards used and met in the assessment:
EN55022: 1998 Class A; CFR Title 47, Part 15, Subpart B, Subpart C and Subpart E
The user is cautioned that changes and modification made to the equipment without the approval of
manufacturer could void the user’s authority to operate this equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
To satisfy RF exposure requirements, this device and its antenna(s) must operate with a separation
distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Information for Canadian Users (IC Notice): SX-215
The term “IC” before the radio certification number only signifies that Industry of Canada technical
specifications were met. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IC: 4908A-SX10WG
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna
having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than the required for successful
communication.
Document #40181-420 Rev. B 36