Filter
Top Products
38
nN
Using Your VAIO Computer
Before You Use the Mouse
Two AA alkaline batteries are supplied with your computer for use in the wireless mouse. Before using the wireless mouse,
you must install the batteries and establish communication between your computer and the mouse. To connect the wireless
mouse, it must be located within a range of 11 inches from the radio frequency receiver.
!
To maintain good communication, operate the wireless mouse within the distance limitation of the mouse: approximately 2 feet (60 m) from the radio
frequency receiver.
Confirm that the supplied AA batteries are properly installed.
Press the CONNECT button located on the bottom of the radio frequency receiver first, and then press the CONNECT button on the bottom of the mouse.
Verify the radio frequency receiver is free of obstructions that may prevent proper operation.
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near the wireless mouse. These devices may cause
interference, causing the mouse to stop working properly.
Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns.
Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing.
Do not place metal furniture near the computer or wireless mouse, as this may create interference, causing the mouse to stop working properly.
Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery.
Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the mouse.