Filter
Top Products
102
nN
Using Peripheral Devices >
Using the Noise Canceling Headphones
❑ When the noise canceling function does not seem to be working, unplug the supplied noise canceling headphones
completely and then plug them back again.
❑ Keep the built-in microphone (1) of the noise canceling headphones unblocked to ensure that the noise canceling function
can be fully in effect.
❑ You may hear a soft hissing noise while the noise canceling function is enabled. This is just operational noise that the
function generates and does not indicate a malfunction.
❑ You may feel that the noise canceling function has little effect or ambient noises seem even louder, depending on the type
of noise or the degree of quietness in your environment. In such a case, disable the noise canceling function.
❑ Use of a mobile phone may cause radio interference with the noise canceling headphones. When using the headphones,
keep mobile phones away from the headphones.
❑ Plugging or unplugging the noise canceling headphones generates noise. This is normal and does not indicate a
malfunction. Be sure to take off the headphones from your ears before plugging or unplugging the headphones.
❑ Be sure to use the supplied noise canceling headphones. You can plug the headphones supplied with a Walkman
®
to
your computer but the noise canceling function of the computer will not work well with such headphones.
❑ If you configure your noise canceling headphones to pick up sounds from its built-in microphone and output them through
the earpieces, the sounds will be amplified. Be careful about the volume when you change the configuration.