Filter
Top Products
17
Remote Commander
Overview
AUDIO jack (stereo minijack)
To listen to sound output from a
computer, connect via this jack to the
audio output of the computer.
d AC IN socket
Connects the supplied AC power cord.
e OUTPUT
MONITOR connector (HD D-sub
15-pin, female)
Connect to the video input connector of
the monitor. Outputs signals from the
selected channel and computer signals
only from among the signals from the
INPUTA or INPUT B.
AUDIO jack (stereo minijack)
Connects to external active speakers.
The volume of the speakers can be
controlled by the VOLUME +/– keys on
the Remote Commander.
When INPUTA or B is selected, the
sound input to the AUDIO connector of
INPUT A or B is output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.
f VIDEO IN (Video input)
Connects to external video equipment .
S VIDEO jack (mini DIN 4-pin)
Connects to the S video output (Y/C
video output) of video equipment.
VIDEO jack (phono type)
Connects to the composite video output
of video equipment.
AUDIO jack
Connect to the audio output of video
equipment.
g REMOTE
RS-232C connector (D-sub 9-pin,
female)
Connects to a computer to operate the
projector from the computer.
Remote Commander
The supplied remote commander differs
according to the model. Refer to the relevant
page.
VPL-CX125/CX155/CW125: Page 17.
VPL-CX100/CX120/CX150: Page 19.
The keys that have the same names as those
on the control panel function identically.
a ?/1 (On/Standby) key
b INPUT A/B/C/D/E keys
Selects the input signal output from the
connector of the same name as those of
the Remote Commander.
INPUT D key and INPUT E key are not
used in this model.
VPL-CX125/CX155/CW125
COMMAND
INPUT
A
INPUT
B
INPUT
C
INPUT
D
VIDEO
ENTER
MENU APA
RESET
SHIFTZOOMFOCUS
ASPECT
D ZOOM MUTING
PIC
AUDIO
+
–
+
–
VOLUME
FREEZE
1 2 3
KEY
STONE
S VIDEO
INPUT
E
AIR
SHOT
OFF ON
ID MODE
1
2
wa
q
s
3
4
5
6
7
8
9
0
qa
qk
qf
qh
qj
qg
qd
w;
ql