Filter
Top Products
39
The Function Menu
Adjustments and Settings Using a Menu
The Function Menu
The Function menu is used for changing the settings of the projector.
Setting items Functions Initial setting
Smart APA The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” on the
Signal menu for the input signal from a computer.
• On: When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the “Smart APA,” it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed. You
can adjust the picture by pressing the APA key on the
Remote Commander even if “Smart APA” set to
“On.”
• Off: The APA functions when you press the APA key
on the Remote Commander.
On
Auto Input Search When set to “On,” the projector detects input signals in
the following order: Input A, B,
*
C/Video/S-Video. It
indicates the input channel when the INPUT key is
pressed.
*VPL-CX125/CX155/CW125 only
Off
Test Pattern When set to “On,” a test pattern is displayed on the
screen during “V Keystone” or
*
“Side Shot”
adjustment.
*VPL-CX125/CX155/CW125 only
Off
Speaker Set to “Off” to cut the sound of the internal speakers.
When set to “Off,” “Speaker: Off” apears on the screen
when you turn on the power.
On
Start Up Image • On: Displays the Start Up Image on the screen after
turning on the power.
• Off: Does not displays the Start Up Image on the
screen after turning on the power.
On
Standby Mode When set to “Low”, the power consumption is set to
low in standby mode.
Low