Filter
Top Products
GB
14
Location and Function of Controls
1 I / 1 (on/standby) key
2 ENTER/arrow key (
v/V/b/B)
Press the center of the key to use
ENTER.
3 MENU key
4 D ZOOM +/
– key
Enlarges the image at a desired location
on the screen.
+:Pressing the + key once displays the
icon. This icon indicates the point you
want to enlarge. Use an arrow key (v
/
V/b/B) to move the icon to the point
to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
–:Pressing the – key reduces an image
that has been enlarged with the D
ZOOM + key.
5 Infrared transmitter
6 FREEZE key
Used to freeze the picture projected. To
cancel the freeze function, press the key
again.
7 INPUT key
8 APA (Auto Pixel Alignment) key
Adjusts a picture clearest automatically
while a signal is input from a computer.
Used when “Smart APA” in the SET
SETTING menu is set to “Off.”
Normally set to “On.”
9 D KEYSTONE key
Used to adjust the tilt of the projector, or
the trapezoidal distortion of the image
manually. Each time you press this key,
the Tilt menu and the V Keystone menu
is displayed alternately. Use the arrow
key (v
/V/b/B) for the adjustment.
q; RESET key
Resets the value of an item back to its
factory preset value or returns the
enlarged image back to its original size.
This key functions when the menu or a
setting item is displayed on the screen.
Before using the Remote
Commander
Pull out the clear film from the lithium
battery holder.
To replace battery
1 Release the lock of the lithium battery
holder by picking it, and pull out the
holder from the Remote Commander.
Remote Commander