Filter
Top Products
Hardware Installation
SY-KT880 DRAGON 2 V2.0
41
F. ATX12V Power Supply
The power supply connector is the last connection to be made when
installing a motherboard. This motherboard requires an ATX 12V power
supply. AT or ATX power supplies cannot be used. We recommend a power
supply of at least 350W, or 400W under full loading.
Steps:
1. Connect the 20 pin connector to the ATX power connector. See FIG. 1.
2. Connect the 4 pin connector to the +12V power connector. See FIG. 2.
Note 1:
The presence of the +12V power connector indicates
that a power supply is ATX12V; the absence of the +12V
power connector indicates that a supply is ATX.
Note 2:
When using the Power-On by Keyboard function,
please make sure the ATX 12V power supply is able to provide
at least 1220mA on the 5V Standby lead (5VSB).
A
TX Power
5VSBLED
+12V Power Connector