SOYO 266 Computer Hardware User Manual


 
ALI M5281 IDE3/IDE4 Driver Installation
SY-KT880 DRAGON 2 V2.0
82
Chapter 5
ALI M5281 IDE3/IDE4 DRIVER
INSTALLATION
You can use your IDE3/IDE4 as
1. Normal IDE function.
2. RAID function. (RAID0, 1, 0+1)
To use IDE3/IDE4 as normal IDE, please do the following steps
1. Go to the CMOS setup SOYO COMBO Feature and set the
“Onboard SATA/PATA 3,4” to “Enable”.
2. Install the ALi M5281 driver. See driver installation instruction
below.
To use IDE3/IDE4 as RAID controller, please do the following steps
1. Connect 2 hard disk on IDE3/IDE4.
2. Go to the CMOS setup SOYO COMBO Feature and set the
“Onboard SATA/PATA 3,4” to “Enable”.
3. Go to the CMOS setup BOOT CONFIGURATION SETUP
BOOT DEVICE PRIORITY
4. Set the “First Boot Device” to “SCSI Card”.
5. Press “Ctrl+A” when the Ali M5281 BIOS summary screen appears.
6. Create a disk array, check appendix A for create instructions.
7. Install the ALi M5281 driver. See driver installation instruction
below.
To boot from the IDE 3/IDE4
1. Go to the CMOS setup SOYO COMBO Feature and set the
“Onboard SATA/PATA 3,4” to “Enable”.
2. Go to the CMOS setup SOYO COMBO Feature and set the