Filter
Top Products
BIOS Setup Utility
SY-KT880 DRAGON 2 V2.0
55
Setting Description Note
AGP Default
Primary
Graphics
Adapter
PCI
This item indicates if the primary
graphics adapter uses the PCI or the
AGP bus. The default AGP setting
still lets the onboard display work
and allows the use of a second
display card installed in an AGP
slot.
Disabled
Vlink 8X
Supported
Enabled
Increase system performance.
Default
AGP Mode Control
Setting Description Note
1X
AGP Mode
2X
This item allows you to choose the
AGP Mode.
4X Default
Disabled Default
AGP Read
Synchronization
Enabled
Enabled/Disabled AGP read
synchronization capability.
Disabled Default
AGP Fast
Write
Enabled
Enabled/Disabled AGP fast write
capability.
32M
64M Default
128M
Graphics
Aperture Size
256M
This item defines an AGP for the
graphics. Leave this item at the default
value 64MB.
Disabled Default
AGP Master 1
W/S Read
Enabled When Enabled, read to the AGP
(Accelerated Graphics Port) are
executed with one wait states.
Disabled Default
AGP Master 1
W/S Write
Enabled When
Enabled,
writes to the
AGP(Accelerated Graphics Port) are
executed with one wait states.
Normal Default
Fast
Fast
Command
Ultra
Increase system performance.