Filter
Top Products
SY-K7VTA PRO V1.0 Quick Start Guide
12
Hardware
Installation
Step 4. Configure Memory
Supports PC133/ PC100 SDRAM and Virtual Channel Memory (VCM) SDRAM up to 3 DIMMs and
using system memory up to 1.5GB.
Memory Configuration Table
Number of Memory Modules DIMM 1 DIMM 2 DIMM3
RAM Type SDRAM/ VCM SDRAM
Memory Module Size (MB)
32/64/128/256/512 MB
How to Clear CMOS Data(JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS
memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white colored cap
can easily identify this jumper.
2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
CMOS Clearing
Clear CMOS Data Retain CMOS Data
JP5 Setting
Short pin 2-3 for
at least 5 seconds to clear
the CMOS
Short pin 1-2 to retain
new settings
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
123
123