Filter
Top Products
Hardware Setup SY-5SSM & SY-5SSM/5
29
2. Wake-On-LAN (WOL)
Attach the 3-pin connector from the LAN card which supports the
Wake-On-LAN (WOL) function to the JP44 connector on the
Motherboard. This WOL function lets users wake up the connected
computer through the LAN card.
Please install according to the following pin assignment:
3. Infrared (IR1)
Plug the 5-pin infrared device cable to the IR1 connector. This will
enable the infrared transfer function. This Motherboard meets both
the ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
Wake-On-LAN
JP44 Pin Assignment
5VSB
GND
12
3
MP - Wake-up
Infrared (IR1) Connector
IR1 Pin Assignment
1
2
4
5
VCC
IRRX
GND
IRTX
3