Filter
Top Products
BIOS Setup Utility SY-5SSM & SY-5SSM/5
56
3-4.3 PM Events
PM Events Setting Description Note
DisabledHDD Ports
Activity
Enabled When set to Enabled (default), any
event occurring at a HDD (serial) port
will awaken a system which has been
powered down.
Default
DisabledCOM Ports
Activity
Enabled When set to Enabled (default), any
event occurring at a hard or floppy drive
port will awaken a system which has
been powered down.
Default
DisabledLPT Ports
Activity
Enabled When set to Enabled (default), any
event occurring at a LPT (printer) port
will awaken a system which has been
powered down.
Default
Disabled DefaultVGA Activity
Enabled When set to Enabled (default), any
event occurring at VGA will awaken a
system which has been powered down.
The IRQ’ s, Interrupt ReQuests, which can be exempted much
as the COM ports and LPT ports above can. When an I/O device
wants to gain the attention of the operating system, it signals
this by causing an IRQ to occur. When the operating system is
ready to respond to the request, it interrupts itself and
performs the service.
When set Enabled, activity will neither prevent the system from
going into a power management mode nor awaken it.
Disabled
IRQ [3-7,9-
15], NMI
Enabled Default