Filter
Top Products
SY-KT600 DRAGON Plus Quick Start Guide
16
Hardware
Installation
Step 3. Installation of Expansion Cards
The motherboard has 1 AGP slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion card
into the computer.
2. Press the expansion card firmly into expansion slot in the motherboard.
3. Make sure the metal contacts on the card are correctly seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install driver for the operating system you use.
Note: AGP cards working on 3.3V are not supported. Only AGP cards working on 1.5V
can be used in this M/B. For AGP card voltage specification, please check the AGP card
manual or contact your AGP card’s manufacturer.
Step 4. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the
motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,
Chassis Fan, Front Panel Devices (Internal Speaker, Reset Button, IDE LED and power
switch), Wake-On-LAN card and other devices.
For more details on connecting internal and external peripherals to your new SY-KT600
DRAGON Plus motherboard, please refer to SY-KT600 DRAGON Plus motherboard
User's Manual and Technical Reference online manual on the CD-ROM.
Connectors and Plug-ins
CDSPDO Standard IrDA (Infrared Device Header): SIRCON
Pin1 Pin2 Pin1 Pin2 Pin3 Pin4 Pin5
CDSPDO GND VCC NC IRRX GND IRTX
MIC & LED Connector J30
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8
Line_Out_L GND Line_Out_R GND MIC IN2 GND LAN_ACTIVE_LED VCC
GAMEPORT
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14 Pin15 Pin16
VCC VCC
JOY
A3
JOY
B3
JOY
A1
JOY
B1
GND
MIDI
OUT
GND
JOY
B2
JOY
A2
JOY
B4
JOY
A4
MIDI
IN
VCC NC