Support User Manuals

Spectra Logic T200 Computer Drive User Manual

Open as PDF

of 22

Preparing the Library

May 2010 Spectra T200, T380, T680, T950, or T-Finity Library

9

3. SelectConfiguration > Drives.TheDrivesscreendisplays.

Note: Theindividualdrivetypesareidentifiedby:

 fLTOreferstoFibreChannel.

 LTOreferstoSCSI.

4. BasedonthedriveidentifieryoudeterminedinIdentifytheDrive 

Locationonpage 5,selectReplaceforthedrivethatyouwantto

replace.

AFeedbackRequiredscreen

promptsyoutoconfirmthatyouwantto

replacethedrive.

5. SelectOK.

AnotherFeedbackRequiredscreenindicatesthattherequesteddrive

hasbeensuccessfullyshutdown.

Figure 2 The Drives screen.

Caution

Do not select Remove. This option permanently removes the drive from the

partition. When the replacement drive is installed, it will not be assigned to the

partition from which the malfunctioning drive was removed.

If you select

Remove and the selected drive is the only drive in the partition, the

partition will be deleted.

Important

Do not respond to the prompt in the Feedback Required screen or perform any

other operations from the user interface (either locally or remotely) until you

complete the replacement procedure. Responding before you replace the drive will

power on and configure the drive you just powered down.

previous next