Filter
Top Products
14 Section 2B. Using Your Sprint Mobile Broadband USB Device
To eject a microSD card from the microSD slot
ᮣ Gently push the card in, release, and it will pop
out.
Attaching the Lanyard
A lanyard is included with your device. The lanyard
is a convenient accessory that enables you to wear
the device for maximum portability while on the go.
To attach the lanyard to the device
1. Pinch the looped thread on the lanyard, insert
the tip of the thread into the hook hole on the
device, and push the thread until it exits through
the other side of the hook hole (1).
2. Insert the lanyard clip through the loop and pull
the clip through the loop (2).
3. Continue to pull the clip until the loop is tight
and secure (3).
Note
For further details about using the microSD
memory storage feature, including how to save
files to the card, consult the user guide.
Important
Do not wear the lanyard around rotating
equipment or machinery or during sleep.
An emergency release clip is constructed
in the design; however, you may also cut
the lanyard off in an emergency.
Note
Do not pull the lanyard too tight,; otherwise, you
will be unable to easily remove the clip.