SRS Labs 8953H Projector User Manual


 
62
3.8.4 Registering My Connection
3.8 Prole data (continued)
One of the prole data, which is often used, can be registered as the My
Connection prole data. Once the data is registered, all you need to do is to select
the My Connection to connect to the network. (
29)
1) Click [My Connection].
2) The “Add My Connection” screen will come
up.
The currently selected prole data for the My
Connection is shown with a check mark in
the list.
3) Select one of the prole data listed in the
window and put a mark in the check box.
The data selected before is turned
unmarked.
4) Click [OK], then the window is closed.
If you don’t want to select a new one, click
[Cancel].
• If you don’t want to use the My Connection, mark no data listed in the
window, and click [OK].
• In the list, all prole data are shown no matter which network adapter is
selected. You can register a prole data that is not for currently selected
network adapter as the My Connection prole data.
NOTE
3. Using the Live Mode