SRS Labs 8953H Projector User Manual


 
67
4. Management with Web browser software
4.1 Conguring and controlling the projector via a web browser (Continued)
4.1.1 Logon
Refer to the following for conguring or controlling the projector via a web browser.
1) Enter “http://192.168.1.10/” into the address
bar of the web browser and press “Enter”
key or click “
” button. The screen in Fig.
4.1.1a will be displayed.
2) Enter your ID and password and click
[Logon].
Example: If the IP address of the projector is set to 192.168.1.10:
Fig. 4.1.1 a “Logon menu”
Below are the factory default settings for administrator ID, user ID and passwords.
Item ID Password
Administrator Administrator <blank>
User User <blank>
If the logon is successful, either the Fig. 4.1.1 b or Fig. 4.1.1 c screen will be
displayed.
Fig. 4.1.1 b “Logon with Administrator ID”
Main menu
Fig. 4.1.1 c “Logon with User ID”
Main menu
3) Click the desired operation or conguration item on the main menu located on
the left-hand side of the screen.