Star Micronics CBM-820 Printer User Manual


 
7
2.4 Power Supply Specications
Important!
When using a printer power supply other than the specied AC adaptor
(31AD), be sure that the following cautions are observed.
Use a power supply of DC 24 V ±5% and more than 1.9 A.
Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.
Power Supply
AC Adaptor 31AD, switching type
Input AC100 to 240V 50/60Hz
Output DC 24V ± 5%, 1.9A
Plug TCP8927-83-1100 (Hoshiden brand or equivalent.)
Consumption Current
Conditions: DC 24V, excluding external equipment driving
Operating
(approximate averages)
Continuous ASCII printing + paper feed: 0.6A
Solid block printing + paper feed: 1.0A
Solid block printing: 1.9A
Peak (solid printing): 3.1A
Stand-by
(approximate averages)
Paper release deactivated: 0.24 A
Paper release activated: 0.07A