Filter
Top Products
– 36 –
9.2 Command Details
9.2.1 Description of Each Items
XXXX
Notes Of "Enabled only at the head of the line" in Section 9.1, the "head of the line" refers to the
case when the following condition is satisfied.
(1) There is no print data (space and skipping portion by HT included) in the current
print buffer.
[Function] Shows a command function.
[Code] Shows a sequence of code consisting the command; ASCII represents the ASCII code and [ ]k
a repeat count of k-times.
[Range] Shows a settable range of an argument.
[Outline] Outlines the command.
[Caution] Describes a caution for the command as required.
[Default] Describes an initial value for the command, if accompanied by an argument.
[See Also] Describes other associated commands in using the command.
[Example] Describes an example of using the command.
< >H: Denotes a hexadecimal number.
< >B: Denotes a binary number. < >: Denotes a decimal number.