Star Micronics LC-240 Printer User Manual


 
Troubleshooting guide 51
Line spacing is incorrect. Jamming paper. Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 40.
The line spacing or leading
selected your application
program is wrong.
Choose a different line
spacing or leading setting
from your application.
Auto line feed with carriage
return is enabled by the User
Setup Utility.
Use the User Setup Utility to
disable auto line feed with
carriage return. See “Auto
LF with CR” on page 24.
Lines print over each other. Auto line feed with carriage
return is disabled by the
User Setup Utility.
Use the User Setup Utility to
enable auto line feed with
carriage return. See “Auto
LF with CR” on page 24.
Jamming paper. Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 40.
Incorrect number of lines are
printed on the page.
Auto line feed with carriage
return is enabled by the User
Setup Utility.
Use the User Setup Utility to
disable auto line feed with
carriage return. See “Auto
LF with CR” on page 24.
The line spacing or leading
selected by your application
program is wrong.
Choose a different line
spacing or leading setting
from your application.
Text and graphics are
malformed.
Print quality is poor.
Vertical dot adjustment is not
set properly.
Use the User Setup Utility to
set the printer’s vertical dot
alignment.
The printer is not set up
correctly for the thickness of
paper being used.
Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 40.
Problem Possible Cause
Recommended
Action