Select IBM character set
Mode
ASCII Decimal Hexadecimal
< ESC >
“t”
“1” 27 116 49 1B 14 31
Std.
< ESC >
“t”
<l> 27 116 1 1B 74 01
Selects an IBM character set (character set #2 unless an < ESC > “7”
command has been received). Ignored in IBM mode, since the IBM
character set is selected automatically.
Select IBM character set #7
Mode
ASCII
Decimal Hexadecimal
Both
<ESC> “7” 27 55 1B 37
-.
Selects IBM character set #l. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command. In IBM mode, character set #l is the power-up
default if DIP switch l-7 is OFF.
Select IBM character set #2
Mode ASCII
Decimal
Hexadecimal
Both
<ESC> “6”
27 54
1B 36
Selects IBM character set #2. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command, In IBM mode, character set #2 is the power-up
default if DIP switch l-7 is ON.
Select international character set
Mode
ASCII
Decimal Hexadecimal
Std.
<ESC> “R” n
27 82 n 1B 52 n
IBM
<FS> “R” n 28 82 n 1C 52 n
Selects an international character set according to the value of n.
n Character set n Character set
0 U.S.A
7
Spain I
1 France
8
Japan
2 Germany
9
Norway
3 England
10
Denmark II
4 Denmark
I 11
Spain II
5 Sweden
12
Latin America
6 Italy
13
Denmark/Norway
64