Expanded printing
Mode
ASCII
Decimal
Hexadecimal
<ESC> “w” “1”
21 87 49 1B 57 31
Both
<ESC> “w”
<I>
27 87 1 IB 57 01
Causes subsequent characters to be expanded to double width.
Cancel expanded printing
Mode
ASCII
Decimal
Hexadecimal
<ESC> “w” “0”
27 87 48 1B 57 30
Both ’
<ESC> ‘ ‘w” <o>
27 87 0 1B 57 00
Stops expanded printing and returns to normal width.
Expanded printing for one fine
Mode
ASCII
Decimal
Hexadecimal
<so>
14
OE
Both
<ESC> <so>
27 14
IB OE
Causes subsequent characters in the current line to be expanded to double
width. Characters return to normal width after the next line feed ( < LF > ).
The <DC4>, <VT>,
< FF > , and < ESC > “W” 0 commands also
cancel expanded printing.
Cancel one-line expanded printing
Mode
ASCII Decimal
Hexadecimal
Both
<DC4>
20 14
Stops one-line expanded printing set with < SO > or < ESC > < SO > .
Does not cancel < ESC > “W” 1.
Select proportional spacing
Mode
ASCII
Decimal Hexadecimal
< ESC >
“ w
P “199
27
112 49
1B 70 31
Both
<ESC>
“ ”
P Cl>
27
112 1
1B 70 01
IBM <ESC>
“P” Cl>
27
80 1
IB 50 01
Causes subsequent characters to be proportionally spaced. Ignored if
the Print Pitch switch was pressed during power-up.