Filter
Top Products
Print quadruple-density 8-M graphics
Mode
ASCII
Decimal
Hexadecimal
<ESC>
“z” nl n2
21 90 nl n2 IB 5A nl n2
Both
ml m2
ml m2
ml m2
Prints bit-image graphics at 240 dots per inch horizontally (maximum
1920 dots wide), skipping every second dot in the horizontal direction.
See < ESC > “K” for other information.
Select graphics mode
Mode
ASCII
Decimal
Hexadecimal
<ESC> “*” n0 nl 27 42 n0 nl 1B 2A n0 nl
Both
n2 ml m2
n2 ml m2
n2 ml m2
Selects one of seven graphics modes depending on the value of n0 and
prints bit-image graphics in this mode. See < ESC > “K” for information
on nl, n2, ml, m2, . . .
n0 Graphics mode
0 Normal-density
1 Double-density
2 Double-density, double-speed
3 Quadruple-density
4 CRT graphics, mode I
5 Plotter graphics
6 CRT graphics, mode II
(60 dots per inch)
(120 dots per inch)
(240 dots per inch)
(80 dots per inch)
(72 dots per inch)
(90 dots per inch)
Convert graphics density
Mode
ASCII
Decimal
Hexadecimal
I
Both
< ESC z “?” n
m
I27 63 n m 1 IB 3F n m 1
Converts graphics defined by subsequent < ESC > “K”, < ESC > “I-“,
< ESC > “Y” or < ESC > “Z” commands to a density mode defined
by <ESC>
“*,,, n is “K”, “L”,
“Y” or “Z”, indicating the mode to be
converted. m is a code from < 0 > to < 6 > indicating one of the modes
of <ESC> “*“.