Star Micronics SP298 Printer User Manual


 
124
APPENDIX
Power Supply Specifications
Important!
When using a printer power supply other than the optional AC adaptor (PS48-
24A), be sure that the following cautions are observed.
Use a power supply of DC 24 V
±
5% and more than 2.0 A.
Be careful about installing the printer in an area where there is noise. Take the
appropriate measures to protect against electrostatic AC line noise, etc.
The optional cable set can be connected.
Power Supply
AC Adaptor PS48-24A, switching type
Input 90 to 264V AC, 50/60Hz
Output 24V DC
±
5%, 2.0A
Plug 3-pin POWER JACK TCP 8927 (Hoshiden brand or equivalent.)
Consumption Current
Conditions: 24V, excluding external equipment driving
Operating
(approximate averages)
Continuous ASCII printing + paper feed: 0.6A
Solid block printing + paper feed: 1.0A
Solid block printing: 1.9A
Peak (solid printing): 3.1A
Stand-by
(approximate averages)
Paper release deactivated: 0.24 A
Paper release activated: 0.07A