Star Micronics SP298 Printer User Manual


 
6
ENGLISH
Removing the ribbon cassette
Use the following procedure to remove the ribbon cassette from the slip printer
when you want to replace it with a new one.
Make sure that the printer is turned off and unplugged from its power
outlet.
Remove the printer cover.
Grasping the ribbon cassette as shown, gently pull it away from the printing
mechanism.
Use the procedure under “Installing the ribbon cassette” on page 4 to install
a new cassette.
Connecting to a power outlet and turning power on and off
Plug the AC adapter that comes with the printer into the printer’s AC
adapter cable connector.
Connect a three-prong grounded power cord to the power cord connector of
the AC adapter.
Note:
The printer does not come with a power cord, so you must provide one yourself.