Filter
Top Products
– 12 –
ENGLISH
3) Paper cut error
Note
1) If the cutter doesn’t return to the home position, or doesn’t perform the
initial movement, it cannot be recovered.
2) If the paper is jammed, turn the power off, clear the jammed paper, then
turn the power ON.
3) Handling paper cut errors that occur in the printer status.
STAR Mode: Non recoverable error
ESC/POS MOde: Recoverable error
4) Paper detection error
POWER lamp
On
On
Recovery Conditions
Automatically recovered by loading
a new paper roll, then closing the
printer cover.
Indicators show that the paper end is
approaching, but the printer contin-
ues to print.
Error Description
Paper out error
Paper near end
ERROR lamp
Flashes at 0.5
second intervals
Flashes at 2
second intervals
POWER lamp
Off
Recovery Conditions
Recovered If the cutter returns to the
home position after turning the power
OFF and ON.
Restoration is also possible with the
<DLE><ENQ>n command when in
the ESC/POS mode.
Error Description
Paper cut error
ERROR lamp
Flashes at 0.125
second intervals