Filter
Top Products
– 16 –
ENGLISH
Important!
1. Do not touch the cutter blade.
· There is a cutter inside the paper outlet slot. Not only should you not
put your hand in the paper outlet slot while printing is in progress,
never put your hand into the outlet even when printing is not in
progress.
· The printer cover can be opened when replacing the paper. How-
ever, since the cutter blade is on the inside of the printer cover, be
careful not to place your face or hands too close to the cutter blade.
2. Do not pull the cover open lever and open the printer cover when
printing is in progress or when the auto cutter is operating.
3. Do not operate the cover open lever while pressing on the printer
cover with your hand.
4. Do not pull out paper while the printer cover is closed.
5. The heating element and the driver IC of the thermal head are easily
damaged. Do not touch them with metal objects, sandpaper, etc.
6. During and immediately after printing, the area around the thermal
head is very hot. Do not touch it, as you could be burned.
7. Printing quality may suffer if the thermal head heating element
becomes soiled by being touched with your hands. Do not touch the
thermal head heating element.
8. There is a risk of damage to the driver IC of the thermal head from
static electricity. Never directly touch the IC.
9. The printing quality and working life of the thermal head cannot be
guaranteed if any paper other than that recommended is used. In
particular, paper containing [Na+, K+, C1-] may drastically reduce
the working life of the thermal head. Please exercise caution.
10.Do not operate the printer if there is moisture on the front surface of
the head from condensation, etc.