StarTech.com SV1115IPEXT Server User Manual


 
2. From Mouse Properties, click on the Motion tab.
3. Make sure the Pointer speed bar is centered and Acceleration is set to None.
Windows 2000
1. From the Control Panel, Click on Mouse.
2. From Mouse properties, click on the Motion tab.
3. Make sure that the Pointer speed bar is centered and Acceleration is set to None.
Windows XP and Windows Server 2003
1. Go to Pointer Options and turn off Enhance Pointer Precision and ensure that the
pointer speed bar is centered.
Linux, Unix and X-Windows
1. Add this command to your xinitrc, xsession or other startup script:
xset m 0/0 0 (For more information, please refer to Troubleshooting)
Configuring SV1115IPEXT
SV1115IPEXT offers four distinct methods for configuring the unit for your network.
Which method will work best will depend on your level of experience and your specific
network configuration.
Web Configuration Using the On-Screen Display
Upon boot-up, including following a reset, SV1115IPEXT will display a window on the
local video output (front VGA connector), that will appear as follows:
The initial screen will display the IP address assigned by your existing DHCP server (if
present on your network). If no DHCP server is detected, a factory assigned IP address
Instruction Manual
7