Filter
Top Products
Instruction Manual
67
Storage Temperature
-40°C to 65°C ( -40°F to 158°F)
Operation Temperature
0°C to 40°C (32°F to 104°F)
Humidity
80% rh, nc
Dimensions
310 x 440 x 44 mm
Weight
2200 grams (4.5 Lbs)
Electrical
100-240 V AC, 0.5 A, IEC320 socket
Frequency
50-60 Hz
Source code for the unit operating system is available upon request. •
Please contact us by phone, live chat, or email to make your request.
This offer is valid for three years from the date of purchase and/or
for as long as parts or customer support is offered for this product.
Charges for the reasonable cost of copying and/or conveying may
apply
Caution
This is an IEC safety Class 1 product. Before using, the ground wire in the
line cord or the rear panel binding post must be connected for safety.
AC Power Source•
This product is intended to operate from an AC power source that will
not apply more than 250 V AC RMS between the supply conductors or
between either supply conductor or ground. A protective ground
connection by way of the grounding conductor in the power cord is
required for safe operation.
Use the proper Power Cord•
Use only the power cord and connector appropriate for the voltage and
plug configuration in your country. Use only power cord in good
condition Refer cord and connector changes to qualified service
personnel.
Do Not Remove Cover•
To avoid personal injury, electric shock or death, do not remove the unit
cover.
Do not operate the unit without the cover properly installed. •