Filter
Top Products
Problem Cause Solution
Robot does not
respond or
responds poorly
to remote control.
• Infrared signal weak
-
ened by sunlight or
other bright light
source.
• Out of operating range.
• Interference with
infrared signal.
• Move away from light
source.
• Ensure remote is within
4
1
⁄2 feet of robot.
• Recalibrate remote
control output. Move
the remote’s joystick
in a circular motion
around its outermost
perimeter.
Remote control
ability is lost.
• Remote control
CHANNEL not set to
corresponding robot
play mode.
• Both remote controls
set to the same R/C play
mode.
• Set remote to different
CHANNEL.
Troubleshooting
25