Filter
Top Products
Robot is slow,
erratic or does
not move.
• Robot batteries are
exhausted.
• Remote control batter
-
ies are exhausted.
• Remote control
power switch is in
OFF position.
• Debris (hair, carpet
fibers, dirt, etc.) is
trapped between the
robot’s wheels.
• Recharge the robot
with its charger.
• Replace batteries.
• Switch power to
ON
position.
• Carefully remove
foreign material from
wheels.
Robot does not
engage after
START command.
• Infrared signal not
accepted.
• Robot batteries are
exhausted.
• Remote control
batteries are exhausted.
• Place robots inside the
Dohyo borderline, facing
each other.
• Recharge the robot
with its charger.
• Replace batteries.
Troubleshooting
26
Problem Cause Solution