Filter
Top Products
1
Sun Fire 880 Product Notes
Product Name Equivalence
The official released name for this system is Sun Fire™ V880. Any reference to Sun
Fire 880 on the product, in the system documentation, or in software refers to the
Sun Fire V880. Both names can be considered equivalent and are interchangeable.
Document Revision History
This section provides a summarized revision history of these Product Notes, listed
according to the document revision number and release date. All the updates made
in previous revisions are incorporated into the latest revision; that is, any updates
made in the -13 revision will carry forward through any subsequent revisions. The
first published version of this document is 806-6598-12, September 2001.
Revisions Made in 806-6598-15, December 2001
■ Updated the list of “Required And Recommended Software Patches” on page 3
■ Added “Supported Sun Rack for the Sun Fire 880” on page 12
■ Added “Sun Fire 880 Server Rackmounting Caution Reminder” on page 12
■ Added “Correction to Displaying POST Results” on page 18
■ Added “Correction to the diag-trigger Setting for Enabling ASR” on page 18
■ Added “Correct Usage of the ifconfig Command for PCI Hot-Plug” on page 18
■ Added “Correction to the Attachment Point IDs for DR Procedures” on page 19
■ Added “PCI Hot-plug insert message is wrong for slots 7 and 8 (BugID 4546219)” on
page 26
■ Added “PCI attachment points should be generic (BugID 4388625)” on page 26
■ Added “Status LED may not shut off after PCI hot-plug (BugID 4403481)” on page 27