Sun Microsystems CP3250 Server User Manual


 
C-4 Sun Netra CP3250 Blade Server User’s Guide April 2009
fans IPMB address (optional)
FRU device ID (optional)
Shows information about fans.
fru IPMB address (optional)
FRU device ID (optional)
FRU type (optional)
Shows information about one or a group
of FRUs in the shelf; FRUs are selected
by type or by the parent IPM controller.
frudata IPMB address (optional)
FRU device ID (optional)
block/byte offset (optional)
data (optional)
Provides raw access to the FRU.
Information on the specified FRU.
frudatar IPMB address
FRU device ID
File name
Reads the FRU data area of the specified
FRU and stores the data in the specified
file.
frudataw IPMB address
FRU device ID
File name
Writes the FRU data in the specified file
into the FRU data area of the specified
FRU.
fruinfo -v IPMB address
FRU device ID
Provides user-friendly FRU Information
output.
getthreshold |
threshold
IPMB address (optional)
sensor name (optional)
sensor number (optional)
Shows threshold information about a
specific sensor.
help Shows the list of supported commands.
ipmc IPMB address (optional) Shows information about one or all IPM
controllers in the shelf.
minfanlevel fan level (optional) Shows or sets the minimum fan level.
ps -ef |grep hp Checks the openhpi status.
sensor IPMB address (optional)
sensor name (optional)
sensor number (optional)
Shows information about one or a group
of sensors; sensors are selected by IPM
controller address, number or name.
sensordata IPMB address (optional)
sensor name (optional)
sensor number (optional)
Shows value information for a specific
sensor.
sensorread IPMB address
sensor number
Shows raw value information for a
specific sensor (ignoring any Sensor Data
Record describing the sensor).
TABLE C-1 Shelf Manager CLI Command Summary (Continued)
Command Parameters Description