Chapter 2 Hardware Installation and Service 2-19
2.3.6 Servicing DIMMs
2.3.6.1 DIMM Requirements
The Sun Netra CP3250 blade server supports a total of six DIMMs and the maximum
memory capacity of 24 GB (using four 4 GB DIMMs). The Sun Netra CP3250 blade
server accommodates the following DIMMs and configurations:
■ Up to six standard DDR2 SDRAM registered/ECC DIMMs
■ DIMMs must be installed in matching pairs
■ 2 GB and 4 GB DDR2 modules are supported
■ Maximum of 24 GB in six slots
The Sun Netra CP3250 blade server supports DIMMs that have the following
characteristics:
■ A 144-bit wide data bus DDR2 interface (2x64-bit data + 2x8-bit ECC)
■ DDR2 DIMM: 4.4 - 7.0 watts (1.8 V)
■ Very low profile (VLP) with a maximum height of 0.72 inch (18.3 mm)