Filter
Top Products
30 Sun Fire X2100 M2 Server Installation Guide • August 2006
Default route Do you want to specify a default route IP address
or let the Solaris installation program find one?
The default route provides a bridge that forwards
traffic between two physical networks. An IP
address is a unique number that identifies each
host on a network.
You have the following choices:
• You can specify the IP address. An
/etc/defaultrouter file is created with the
specified IP address. When the system is
rebooted, the specified IP address becomes the
default route.
• You can let the Solaris installation program
detect an IP address. However, the system must
be on a subnet that has a router that advertises
itself by using the ICMP router discovery
protocol. If you are using the command-line
interface, the software detects an IP address
when the system is booted.
• You can choose None if you do not have a router
or do not want the software to detect an IP
address at this time. The software automatically
tries to detect an IP address on reboot.
• Specify One
• Detect One
• None*
Time zone How do you want to specify your default time
zone?
• Geographic
region*
• Offset from GM
• Time zone file
Root password Choose a root password for the system.
TABLE 1 Installation Worksheet
Information for Installation Description or Example
Your Answers:
Defaults are noted
with an asterisk. (*)