Filter
Top Products
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ SERVER 1022G-URF.
Installation and maintenance should be performed by experienced technicians only.
The A+ SERVER 1022G-URF is a 1U rackmount server based on the
SC815TQ-R700UB server chassis and the Super H8DGU-F serverboard. Please
refer to our web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Supermicro H8DGU-F
serverboard and the SC815TQ-R700UB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ SERVER 1022G-URF
into a rack and check out the server conguration prior to powering up the system.
If your server was ordered without the processor and memory components, this
chapter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the A+
SERVER 1022G-URF.