Filter
Top Products
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 6015TC-
T/6015TC-10G. Installation and maintenance should be performed by experienced
technicians only.
The SuperServer 6015TC-T/6015TC-10G is a 1U Twin (two serverboards in a 1U
chassis) rackmount server based on the SC808T-780 server chassis and two Super
X7DCT/X7DCT-10G serverboards. X7DCT/X7DCT-10G supports dual Intel® Xeon®
5400/5300/5200/5100 Series processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7DCT/X7DCT-10G
serverboard and the SC808T-780 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015TC-
T/6015TC-10G into a rack and check out the server confi guration prior to power-
ing up the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface