Filter
Top Products
3-2
AOC-LPZCR1/AOC-SOZCR1 Manual
Using Adaptec's RAID Confi guration Utility
The Adaptec RAID Confi guration Utility includes the following major compo-
nents:
1. Array Confi guration Utility: this utility allows the user to create and manage
arrays. You can also use this utility to initialize and scan disk drives.
2. SCSISelect Unity (or Serial/SATASelect): this utility allows the user to confi gure
the control settings for disk drives.
3. Disk Utility: this utility allows the user to format and verify disk drives.
To Use the Adaptec RAID Confi guration Utility
(*Note: the confi guration procedures listed below are applicable to
SAS, SATA and SCSI settings.)
To use the Adaptec RAID Confi guration Utility, please follow the steps listed
below:
1. Properly confi gure the jumper settings of your add-on card as indicated on
page 3-1.
2. Enable the RAID function in the system BIOS. (*Please refer to the User's
Guide that came with your system for system BIOS confi guration.)
3. Turn on your computer. The BIOS screen as shown below will display during
system bootup: