Filter
Top Products
Chapter 5: Advanced Serverboard Setup
5-29
4. Once all drives have been selected for the RAID array, you will be prompted to
select the RAID properties, including the type of RAID to be used, label, array size
and stripe size (see Figure C-5). When the properties have been defi ned, highlight
Done and press the <Enter> key.
Additional Functions
The tree diagram in Figure 5-9 gives you an overview of the functions included in
the SAS Controller Utility. Refer to this tree to help you navigate through the menus
for the function you wish to perform.
Figure 5-9. Selecting Drives for the Array