Filter
Top Products
Chapter 4: AMI BIOS
4-5
XACPI Confi guration
Use this feature to confi gure ACPI (Advanced Confi guration and Power Interface)
power management settings for your system.
ACPI Aware OS
Select Yes to enable ACPI support for the OS. Disable this feature if ACPI is not
supported by your OS. The options are Yes and No.
Suspend Mode
This setting allows you to confi gure the ACPI (Advanced Confi guration and Power
Interface) state for your system when it is in the Supsend mode. The options
are S1, S3 and Auto.
Report Video on S3 Resume
If set to Yes, VGA BIOS will be activated when the system is set to the S3/STR
Resume mode. The options are Yes and No.
ACPI Version Feature
This feature allows the user to select ACPI Version for the system. The options
are ACPI 1.0, ACPI 2.0, and ACPI 3.0.
Watch Dog Function
Select Enable to enable Watch Dog Timer and allow the system to reboot when it
is inactive for more than 5 minutes. The options are Enabled and Disabled.
USB Device Wakeup from S3/S4
Select Enable to "wake-up" the system via a USB device when the system is in
S3 or S4 State. The options are Enabled and Disabled.
Restore on AC Power Loss
The feature allows the user to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power loss. Select Power-On
for the system power to be turned on after a power loss. Select Last State to allow
the system to resume its last state before a power loss. The options are Power-On,
Power-Off and Last State.
MPS Revision
This feature allows the user to specify the version of the Multi-Processor Specifi ca-
tion (MPS) the motherboard is using. The options are 1.4 and 1.1.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt