Filter
Top Products
34
Command: Ctrl/R,Ctrl/R,Ctrl/R ‘iPort Reset
Response. * ‘iPort/AFM Ready
Default Setting: None
Status Display
This command displays current iPort/AFM status.
Command: //[CR] 'Status Display
Response:
iPort/AFM I
2
C Host Adapter w/ASCII Fast Mode Interface Vxx.xx
Copyright © xxxx, Micro Computer Control Corp.
Visit our Web Site at: http://www.mcc-us.com
RS-232 Baud Rate (19.2KHz)
Destination I
2
C Slave Address (4EH)
Echo/Prompt (Disabled)
Flow Control (XON/XOFF)
Hex Only Display (Enabled)
I
2
C Connection (Closed)
General Call (Enabled)
iPort’s own Slave Address (6EH)
I2C Bus Clock Rate (100 KHz)
iNterrupt Signal (Released)
I2C Bus Time-oUt (10000 msec)
RS-232 Baud Rate
This command sets the RS-232 Baud Rate. (0=19.2k, 1=57.6k, 2= 115.2k)
Command: /B[0|1|2][CR] 'Set RS-232 Baud Rate
Response 1: /BC0[CR] 'Baud Change Complete
Response 2: /BC1[CR] 'Baud Change Complete
Response 3: /BC2[CR] 'Baud Change Complete
Response 3: /I89[CR] 'Invalid Command Argument
Default Setting: /B0[CR]