Filter
Top Products
B-7
Appendix B: AMIBIOS POST Diagnostic Error Messages
APPENDIX B
Check
Point Description
87 The programming before WINBIOS Setup has
been completed. Uncompressing the WINBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.
88 Returned from WINBIOS Setup and cleared the screen.
Performing any necessary programming after WINBIOS
Setup next.
89 The programming after WINBIOS Setup has been
completed. Displaying the power-on screen message
next.
8B The first screen message has been displayed. The
<WAIT...> message is displayed. Performing the PS/2
mouse check and extended BIOS data area allocation
check next.
8C Programming the WINBIOS Setup options next.
8D The WINBIOS Setup options are programmed.
Resetting the hard disk controller next.
8F The hard disk controller has been reset. Configuring the
floppy drive controller next.
91 The floppy drive controller has been configured.
Configuring the hard disk drive controller next.
95 Initializing the bus option ROMs from C800 next.
96 Initializing before passing control to the adaptor ROM at
C800.
97 Initialization before the C800 adaptor ROM gains
control has been completed. The adaptor ROM check
is next.
98 The adaptor ROM had control and has now returned
control to BIOS POST. Performing any required
processing after the option ROM returned control.