Filter
Top Products
Chapter 1: Introduction
1-5
Introduction
Jumper Description Default Setting
JBT1 CMOS Clear See Chapter 2
JP12 PWR Fault See Chapter 2
JP13 3rd PW Supply Fail Alarm Enable Off (Disabled)
JP14 Alarm Reset Off (Disabled)
JPA1 SCSI Controller Enable Pins 1-2 (Enabled)*Note
JPA2, JPA3 SCSI CHA(JPA2),CHB(JPA3)Term.En Off (Enabled)(*Note)
JPF Force PWR On Off (Normal)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
ATX PWR (J1B4) Primary ATX PWR Connector
Aux. PWR (J32) +12V 4-pin Auxiliary System PWR (*Required)
CPU PWR(J1D1) +12 V 8-pin CPU PWR Connector (*Required)
COM1 (J6)/COM2 (J7) COM1/COM2 Serial Port Connectors
FAN 1-8 Fans 1-8 (3-pin: Fans 1-4, 4-pin: Fans 5-8)
DIMM#1A-DIMM#4B Memory DDRII Slots
GLAN 1/2 (JLAN1/2) G-bit Ethernet Ports
J3/J4 IDE1/2 Hard Disk Drive Connectors
J5 VGA Connector
J20 IPMI Connector
J22 System Management Bus Header
J23 Parallel (Printer) Port
J24 Power System Management Header
JA1/JA2 SCSI Channel A/Channel B Connectors(*Note)
JD1 PWR LED(pins1-3)/SpeakerHeader (pins 4-7)
JF1 Front Control Panel Connector
JL1 Chassis Intrusion Header
JOH Overheat LED
JP8 Floppy Disk Drive Connector
JS1/JS2 Intel SATA 0/1 Connectors
JWOL Wake-on-LAN Header
JWOR Wake-on-Ring Header
USB 0/1 Back Panel USB Ports
USB 2/3/4 Front Panel Universal Serial Bus Headers(USB2/
3:JD2, USB4:J11)
Quick Reference ( X6DH8-G2/X6DHE-G2)
(*Please refer to Chapter 2 for pin definitions and detailed
information.)
(*Note: for X6DH8-G2 only)