Filter
Top Products
DS 6608 Product Reference Guide14-6
Prefix/Suffix Values
Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h
Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a prefix or suffix, scan a
four-digit number (i.e., four bar codes from Appendix D, Numeric Bar Codes) that corresponds to that value. See Table E-1 on page E-
3 for the four-digit codes.
When using host commands to set the prefix or suffix , set the key category parameter to 1, then set the 3-digit decimal value. See
Table E-1 on page E-3 for the four-digit codes.
To correct an error or change a selection, scan Cancel on page D-4.
To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 14-7.
Scan Prefix
(07h)
Scan Suffix 1
(06h)
Scan Suffix 2
(08h)
Data Format Cancel
Note