Filter
Top Products
DS 6608 Product Reference Guide4-4
User Preferences Parameter Defaults
Table 4-1 lists defaults for user preferences parameters. To change any option, scan the appropriate bar code(s) provided in the User
Preferences section beginning on page 4-5.
See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 4-1. User Preferences Default Table
Parameter
Parameter
Number Default
Page
Number
User Preferences
Set Default Parameter All Defaults 4-5
Parameter Scanning ECh Enable 4-5
Beeper Tone 91h Medium 4-6
Beeper Volume 8Ch High 4-7
Power Mode 80h Continuous On 4-7
Time Delay to Low Power Mode 92h 5 Minutes 4-8
Trigger Mode 8Ah Level 4-9
Decode Session Timeout 88h 9.9 Sec 4-10
Timeout Between Decodes, Same Symbol 89h 0.6 Sec 4-10
Beep After Good Decode 38h Enable 4-11
Scanstand Session Timeout F0h, 90h 2 Seconds 4-11
Note